ViewSonic PJ513D-1, Service Manual

Page: 25 / 121

22
ViewSonic Corporation
Confidential - Do Not Copy
PJ513D-1
5. Adjustment Procedure
Visual Inspection & Cleaning
Visual Inspection Criteria
1.0 Inspection zone definition and inspection distance
A-side: Up case - Up case surfaces except right / left / behind side’s surface.
Front cover - Front cover surface
B-side: Side - right/left sides surfaces
Back cover - Back cover surfaces
C-side: Low cause - bottom surfaces
z
For spot inspection distance is 45 cm on A/B/C-side. And inspection time is 10 sec.
z
For scratch inspection distance is 45 cm on A/B/C-side. And inspection time is 10 sec.
1.1 Appearance Inspection Criteria
1.1.1 Environment Condition
1.1.1.1 Lighting intensity
All appearance quality shall be inspected with the lighting condition as 500~800Lux
(natural lighting or white fluorescent light).
1.1.1.2 Inspection angle and distance to object or target
All part inspection must be done under direct overhead lighting. Viewing angle and
distance are dependent on surface classification. In all cases, parts must be held in such
that the light reflection does not disturb the inspector's eye.
Figure 1