44
i.
These buttons function the same as the ones on the OSD menus or remote
control.
ii.
To switch between input signals, click on your desired signal.
NOTE:
•
The source list varies according to the connections available on the projector.
• When you use the projector control panel or remote control to change the OSD
menu settings, it may take a while for the web browser to synchronize these
changes with the projector.
2.
The
Tools
page allows you to manage the projector, configure the LAN control
settings and secure access to remote network operations on this projector.
i
ii
iv
iii
v
vi
i.
This section is only used with the Crestron Control System. Please contact
Creston or refer to its user manual for setup information.
ii.
You can name the projector, keep track of its location and the person in
charge of it.
iii.
You can adjust the
LAN Control Settings
.
iv.
Once set, access to the remote network operation on this projector will be
password-protected.
v.
Once set, access to the tools page will be password-protected.
NOTE:
• To prevent errors, only input the English alphabet and digits on the
Tools
page.
•
After making the adjustments, press the “Send” button and the data will be saved
for the projector.
vi.
Press “Exit” to go back to the Remote Network Operation page.
