ViewSonic PA505W, Replacement Instructions

Page: 3 / 5

2
3. Loosen the screw from the lamp module
4. Lift the module handle up.
5. Use the handle to slowly pull the lamp out of the projector.
CAUTION
y
Pullingittooquicklymaycausethelamptobreakandscatterbrokenglassintheprojector.
y
Donotplacethelampinlocationswherewatermightsplashonit,childrencanreachit,ornear
flammablematerials.
y
Donotinsertyourhandsintotheprojectorafterthelampisremoved.Ifyoutouchtheopticalcompo -
nentsinside,itcouldcausecolorunevennessanddistortionoftheprojectedimages.
6. As show in the figure, insert the new lamp. Align the lamp
connector and 2 sharp points with the projector and gently
push the lamp into the locked position.
CAUTION
y
Thelampmodulemustsitsecurelyinplaceandthelampconnectormustbeconnectedproperly
beforetighteningthescrews
y
Pullingittooquicklymaycausethelamptobreakandscatterbrokenglassintheprojector.
y
Donotplacethelampinlocationswherewatermightsplashonit,childrencanreachit,ornearflam -
mablematerials.
y
Donotinsertyourhandsintotheprojectorafterthelampisremoved.Ifyoutouchtheopticalcompo -
nentsinside,itcouldcausecolorunevennessanddistortionoftheprojectedimages.
y
Donottouchglassoflampwithbarehands.Oilsfromtheskincancreateahotspotonthelampand
mayresultwithdamagetothelamp.
4
3
6