ViewSonic NMP-570W, User Manual

Page: 10 / 21

5
Player IP address
You will also need an IP address for the player on your network. This could be
set automatically (DHCP) or manually (static IP):
DHCP – automatically assign network IP address
DHCP is enabled by default. You do not need to
change the settings unless setting a static IP.
Static IP – manually assign network IP address
Highlight “IP configuration” and press “Enter” on
keyboard to <Select>
Move the highlight to “Static IP” below, press
“Space bar” on the keyboard to fill in the star (*)
at the Static IP brackets, and press “Enter” on the
keyboard to select <OK>.
Proceed to configure an available static IP
address. Select Wireless configuration or IP
configuration as determined by your connection.
Please consult your network administrator for
assistance if necessary.
2.4. Video output settings
For best quality, set the output resolution to match your display’s native
resolution to avoid image scaling and blur.
If you are connecting to an LCD TV, the resolution setting is most likely
1366x768, 1280x720, or 1920x1080. If you are connecting a LCD computer
monitor, projector, or plasma display, refer to the device specifications for the
best matching setting.
Press the space bar to fill in the star (*) before pressing the enter key for
<OK>.
2.5. Clock and calendar settings
Set the correct time zone, time, and
date. Daylight Saving (DST) rules
can be configured in Set time zone.