ViewSonic N2635W, User Manual

Page: 40 / 50

35
ENGLISH
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic N2635w
Using the TV Features
Using VGA Function
1. When in VGA source, press the MENU button to
display the OSD main menu.
3UHVVŻRUŹWRVHOHFWWKH³9LGHR´PHQX
3UHVVŸRUźWRVHOHFW\RXUGHVLUHGFRQWUROVDQGSUHVV
ŻRUŹWRDGMXVW
4. For advanced VGA functions, select “VGA” (only
enabled in VGA source) and press ENTER to enter
VGA setting.
3UHVVŸRUźWR3RVLWLRQ´³93RVLWLRQ´
³3KDVH´RU³&ORFN´DQGDGMXVWWKHOHYHOZLWKŻRUŹ
Ŏ
When in VGA source, the Audio, Setup, and Parental
menus are the same as or similar to when in other source.
Instead that some controls are disabled.
Ŏ
When there is no signal in the VGA mode, “No signal.
The power will be turned off.” will be displayed on the
screen, and the TV will automatically turn into power-
saving mode after a few seconds’ idleness. Press any key
on the remote control at any time and the TV will return
to VGA mode.
To Restore Factory Setting
1. Press the MENU button to display the OSD main menu.
3UHVVŸRUźWRVHOHFWWKH³6HWXS´PHQX
3. Press ENTER
RUŹWRHQWHU³6HWXS´PHQX
3UHVVŸRUźWRVHOHFW³0HPRU\5HFDOO´WKHQSUHVV
ENTER to restore the factory default setting.
Change Password:
3UHVVŸRUźWRVHOHFW³&KDQJH3DVVZRUG´WKHQSUHVV
ENTER to enter “Change Password” setting.
2. Enter your new password in “New Password”.
(QWHUWKHQHZSDVVZRUGDJDLQLQ³&RQ¿UP3DVVZRUG´
After you complete the last step, the screen will return
to the top page of Parent menu. If so, the password has
been changed successfully.