25
5.
16:10
: Scales an image so that it is displayed in the center of the screen with a 16:10
aspect ratio. This is most suitable for images which are already in a 16:10 aspect, as it
displays them without aspect alteration.
The table below demonstrates the effects of the aspect ratio settings on projectors with
different native resolutions. Please see
"Projector specifications" on page 65
for the native
display resolution of your projector.
In the pictures below, the black portions are inactive areas and the white portions are active
areas. OSD menus can be displayed on those unused black areas.
Optimizing the image
Selecting a color mode
The projector is preset with several predefined color modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
•
Press
Color Mode
to display the selection bar and press
/
to select a desired mode
or press
Color Mode
repeatedly.
•
Go to the
PICTURE > Color Mode
menu and press
Enter
. Press
/
to select a
desired mode.
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1.
Bright mode
: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the projector
in well lit rooms.
2.
Dynamic mode
: Is designed for presentations under daylight environment to match
PC and notebook coloring. In addition, the projector will optimize the image quality
using the dynamic PC function in accordance with the projected contents.
Aspect ratio setting
When the native aspect ratio of your projector is...
4:3
Auto
4:3
16:9
16:10
Summary of Contents for LS620X
Page 77: ......
