29
Connecting the System Control Box to the Floor Base
1.
Carefully unfold the
System Control Box
panel. Ensure the main system control
board is on the left.
NOTE:
Use caution as the
System Control Box
panel will be separated into two
pieces, however the wires are connected.
2.
Align the
System Control Box
to the eight (8) holes on the
Bottom Cross Beam
and
secure it with eight (8) screws (M6x10mm).
3.
Install two (2) additional screws (M6x10mm) to connect the two halves of the
System Control Box.
