ViewSonic E96f+SB-1, Service Manual

Page: 18 / 59

HR
V-HV Variation rate ajust
TM
BURN IN TIME
HM
MAX H-SIZE RANGE
BI
SET BURN-IN
Hs
SUB H-SIZE
Bb
BOTTOM BALANCE
Hb
H-SIZE WAVE BALANCE
Bp
B+ VOLTAGE ADJUST
Tb
TOP BALANCE
EU
EHT CURRENT
EO
EHT OFFSET
EA
EHT AUTO ADJUST
VG
MAX V-SIZE GAIN RANGE
DC
video IC dc off set
HG
H-SIZE GAIN
SW
H-frequency select
SB
HIGH BRIGHTNESS SELECT
LH
Brightness Save
RETURN
VO
V-CENTER OFFSET
D. To switches the input signal to the other Timing Mode. Please follow step A ~ C to get the optimum picture.
E. Select the " " RETURN function and press the MENU Key, then the Factor Preset window will be returned
to the original OSD window.(user's operating condition)
F. The setting data of the CONTRAST, BRIGHTNESS, PIN-BALANCE, PARALLELOGRAM, ROTATION,
COLOR TEMPERATURE are common mode saved in the memory. Don't needed adjust it individual at every
timing Mode and save in the memory.
3. White Balance, Luminance adjustment:
A. Press MENU Key to show OSD menu ,and press the down Key to select the "size/center" function, then press the
menu Key to enter second menu, press the down key to select “ ”(zoom) about 10S,,then enter into factory setting
area for modulation.
B. Set R,G,B gain DAC value for 30, R ,G ,B bias DAC value for 30.
C. Raster Pattern, Brightness & contrast ratio MAX, adjust G2,make Y=3.0
±
0.3 cd/m
2
, adjust R or B bias, make
x=260
±
10, y=290
±
1,then save it into 9300K,6500K,5000K color temprature.
D. Set the value of LH is 3.
E. Small white screen appears ,make brightness DAC value for 100, adjust R or G or B gain, make x=346
±
10,
y=359
±
10, Y=340~360 cd/m
2
,then save it into 5000K color temprature .
F. Small white screen appears ,make brightness DAC value for 100,adjust R or G or B gain, make x=313
±
10,
y=329
±
10, Y=340~360 cd/m
2
,then save it into 6500K color temprature .
G. Small white screen appears ,make brightness DAC value for 100,adjust R or G or B gain, make x=283
±
10,
y=297
±
10, Y=455~470 cd/m
2
,then save it into 9300K color temprature.
H. Set SB for 2.
J. Raster Pattern, contrast ratio max,adjust brightness value, make Y=0.25~0.3cd/m
2
.
K. Select the 5000 color temprature ,brightness cut off,repeat step E, make x=346
±
10, y=359
±
10, Y=298
±
10
cd/m
2
,then save it into 5000K color temprature .
ViewSonic Corporation Confidential - Do Not Copy E96f+SB-1
15