background image

60

Regulatory and Service Information

Compliance Information

This section addresses all connected requirements and statements regarding 

regulations. Confirmed corresponding applications shall refer to nameplate labels 

and relevant markings on the unit.

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following 

two conditions: (1) this device may not cause harmful interference, and (2) this 

device must accept any interference received, including interference that may 

cause undesired operation. This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses, and 

can radiate radio frequency energy, and if not installed and used in accordance 

with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user 

is encouraged to try to correct the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna.
• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

Warning: 

You are cautioned that changes or modifications not expressly approved 

by the party responsible for compliance could void your authority to operate the 

equipment.

Industry Canada Statement

CAN ICES-003 (B)/NMB-003(B)

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage 

Directive 2014/35/EU.

Summary of Contents for ColorPro VP2756-4K









































































Reviews: