background image

v

CAUTION:

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service 

personnel under the following conditions:

• 

When the power supply cord or plug is damaged.

• 

If liquid has been spilled, or objects have fallen into the monitor.

• 

If the monitor has been exposed to rain or water.

• 

If the monitor has been dropped or the cabinet damaged.

• 

If the monitor does not operate normally by following operating instructions.

Recommended Use

CAUTION:

• 

For optimum performance, allow 20 minutes for warm-up.

• 

Rest your eyes periodically by focusing on an object at least 5 feet away. Blink often.

• 

Position the monitor at a 90° angle to windows and other light sources to minimize glare and 

reflections.

• 

Clean the LCD monitor surface with a lint-free, nonabrasive cloth. Avoid using any cleaning 

solution or glass cleaner!

• 

Adjust the monitor’s brightness, contrast and sharpness controls to enhance readability.

•  Avoid displaying fixed patterns on the monitor for long periods of time to avoid image 

persistence (after image effects).

• 

Get regular eye checkups.

Ergonomics

To realize the maximum ergonomic benefits, we recommend the following:

• 

Use the preset Size and Position controls with standard signals.

• 

Use the preset Color Setting.

• 

Use non-interlaced signals.

•  Do not use primary color blue on a dark background, as it is difficult to see and may produce 

eye fatigue due to insufficient contrast.

Summary of Contents for CDX5552































































Reviews: