33
6.1.3. Audio menu
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
Balance
Treble
Bass
Volume
Audio Out (Line Out)
Maximum Volume
Minimum Volume
Mute
Audio source
Audio reset
Audio Out Sync
50
50
50
30
30
100
0
Off
Digital
Action
Off
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
Switch on state
Panel saving
RS232 routing
Boot on source
WOL
Configuration1 reset
Factory reset
Force on
Action
RS232
Action
Off
Action
Action
Balance
Adjust to emphasize left or right audio output
balance.
Treble
Adjust to increase or decrease higher-pitched
sounds.
Bass
Adjust to increase or decrease lower-pitched
sounds.
Volume
Adjust to increase or decrease the audio output
level.
Audio out (line out)
Adjust to increase or decrease line out output
level.
Maximum volume
Adjust your own limitation for the maximum volume
setting.This stops the volume from being playing
at too loud a level.
Minimum volume
Adjust your own limitation for the minimum volume
setting.
Mute
Turn the mute function on/off.
Audio source
Select the audio input source.There are no audio
output when no video signal.
Analog: audio from audio input
Digital : audio from HDMI/DVI audio.
Audio reset
Reset all settings in the Audio menu to factory
preset values.
Audio Out Sync
Enable/disable audio out (line out) volume
adjustability to sync with internal speakers.
6.1.4. Configuration1 menu
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
Balance
Treble
Bass
Volume
Audio Out (Line Out)
Maximum Volume
Minimum Volume
Mute
Audio source
Audio reset
Audio Out Sync
50
50
50
30
30
100
0
Off
Digital
Action
Off
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
Switch on state
Panel saving
RS232 routing
Boot on source
WOL
Configuration1 reset
Factory reset
Force on
Action
RS232
Action
Off
Action
Action
Switch on state
Select the display status used for the next time
you connect the power cord.
•
{
Power off
} - The display will remain off
when the power cord is connected to a wall
outlet.
•
{
Forced on
} - The display will turn on when
the power cord is connected to a wall outlet.
•
{
Las
t status
} - The display will return to the previous
power status
Panel saving
Choose to enable the panel saving functions and
thus reduce the risk of “image persistence” or
“ghost-imaging”.
•
{
Brightness
} - Select {
On
} and the image
brightness will be reduced to an appropriate
level.The Brightness setting in the Picture
menu will be unavailable when selected.
•
{
Pixel shift
} - Select the time inter val
({
Auto
} / {
10 ~ 900
}
Seconds/
{Off}) for the
display to slightly expand the image size and
shift the position of pixels in four directions
(up, down, left, or right). Activating Pixel
Shift will disable H Position,V Position and
Zoom Mode in the Screen Menu.
Note
: Only suppor t external input source
(HDMI,VGA, DP, OPS).
RS232-Routing
Select the network control port.
Choose from: {RS232} / {LAN -> RS232}
Summary of Contents for CDE5010
Page 72: ...63...