Getting Started
3
Mounting ViewSonic display to the wall
The display can be used in a free standing position or wall-mounted. Before installing the product to the
wall, please consider the following guidelines:
Read the Important Safety Instructions, at the start of this manual.
•
Do
•
not install in a moist or wet environment. This equipment is intended for indoor use.
Do
•
not
install near heat source, or strong magnetic fields.
Use only
•
ViewSonic approved wall-mounting brackets to support the display weight.
Before attaching the wall mount plate to the back cover, ensure the product is working.
•
If your display is already set up for free-standi
ng operation, you need to first remove the stand before
•
mounting the device to the wall.
To attach the wall-mount bracket to display safely, please use the following guidelines:
Disconnect the power and any other cables that might hinder moving the display.
•
Set the display on a table or work surface, placing the screen face down on a towel or woolen blanket
•
to protect the screen surface from damage while installing plate.
Before installing the display on the wall, ensure you have recorded the product serial number on page
•
(i) of the User Guide, as you will need the serial number to request service should there be a service need.
Install the wall mount plate to the display using screws
•
NO LONGER than 12mm, as longer screws
found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail.
The wall-mount screw type is M6 x L12.
Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure
•
there is at least 3cm of space surrounding any air-vents of your display to allow adequate cooling
during operation.
Hang the display wall mount plate to the wall mount bracket, completing installation.
•
Enjoy your ViewSonic display!
Summary of Contents for CDE4200-L
Page 50: ......