25
Pause –
This button is triangular with one point oriented down, like a down arrow, and has a
pause symbol (two vertical bars) screen-printed on it. Pressing this button during a print job
will interrupt the embossing. Continue the embossing action by pressing the resume button, or
press cancel to abort the print job.
When no print job is active, tapping this button will move paper to the top of form position and
holding the button will feed the paper backward out of the machine.
B. Status Lights
Green light (power symbol) –
This light is on when the embosser is powered and ready to
receive data. It is blinking if the embosser is starting up, or if it is busy receiving data.
Red light (warning symbol) –
This light is blinking when the embosser's housing lid is open,
or when an error occurs during printing. The specific errors are: out of paper, paper jam,
embosser head position error, housing open, power fault or if the print job data is corrupted.
To clear the error status warning light, press the cancel button.
C. Audio Alerts
Computer screen error alerts
During printing the printer driver is monitoring the status of the print job. If problems occur during
printing, the embosser will inform the user of the error by showing a dialog box on the screen.
This will only happen if the embosser is connected locally to the computer via the USB interface,
or if it is connected to the network through its on-board LAN port. This will not happen with
embossers networked through print servers or connected via BlueTooth connections.
Paper Out
– (High-Low) Load new print media to the embosser and press the cancel button
to clear the error status warning. Now any print job which was sent but not printed before the
error occurred should be resent.
Paper Jam –
(High-Low-High) Remove the jammed paper and press cancel to clear the error
status warning. Now any print job which was not printed before the error occurred should be
resent.
Alignment error / Emboss head stalled –
(High-High-Low) Press cancel to clear the error
status warning. Try printing again. If the problem persists, contact ViewPlus Support.
Print data error –
(Low-High) Press cancel to clear the error status warning and send the print
job again.
