10
C. Alignment
The VP Elite and VP Premier embossers automatically check alignment for the tactile dots at the
beginning of each print job. If the embossed output of your embosser seems to be incorrectly
aligned, please ensure that the embosser is on a flat, even surface. It is possible to bend the body
of the embosser and cause the ViewPlus embosser to be out of alignment. After a paper jam, it is
also possible for the embosser to be incorrectly aligned if you simply continue to print. Start a
new print job, allow the VP Elite or Premier to automatically align, and check the new document
to see if the alignment is good.
If the embossed dots do not seem to be aligned, please contact ViewPlus Support.
D. Software Installation
The Windows printer driver is included with your Elite or Premier on CD, as well as the Tiger
Software Suite (TSS).
Do not connect your Elite or Premier to the computer during installation of the Windows printer
driver, or turn it off during this process. Run the driver setup from the CD, or download the current
Elite and Premier driver from the ViewPlus website, www.viewplus.com. Follow the instructions
from the installation program.
After installation of the driver, connect the Elite or Premier to the computer and turn it on. The
system should automatically detect the embosser and add it to the system control panel under
'Devices and Printers'.
It is possible that it does not detect correctly at first try on one USB port. In this case, please try
again to connect to the same or another USB port of your computer.
For installation of the Tiger Software Suite please also follow the instructions from the setup
program. For use of the Tiger Software Suite (TSS) please refer to the TSS manual.
