VIEWONHOME VOH1001, Installation And User Manual

Page: 4 / 21

6 7
Zone setup of accessories
Every detector can be assigned to 4 t categories of zones: Home Mode Zone, Delay Zone,
Normal Zone and 24-H Zone. To assign a detector to a zone, open its case and move its jumpers
according to the drawing below:
D0
D3
D0
D3
D0
D3
D3
D0
A. Home Mode Zone B. Delay Zone C. Normal Zone D. 24-H Zone
Normal zone
When the system is armed, if a sensor is triggered, the siren rings out. When the system is disarmed,
sensors do not trigger an alarm.
24h zone
Regardless the system is armed or disarmed, sensors assigned to the 24h zone can trigger an alarm.
It is recommended to set smoke detectors, gas detectors and outdoor beam sensors in the 24-H zone.
Delay zone
An entry and an exit delay can be set. In such case, sensors assigned to the “Delay Zone” will not
trigger an alarm during the of delay set. For example, if you assign a detector to the
Delay zone and you set the Entry/Exit Delay to 30 seconds, the detector will not trigger an
alarm within 30 seconds you enter your home and within 30 seconds before you leave it so that
you can leave and enter your home without triggering an alarm. Refer to the on page 6
of this manual to learn how to set the entry and exit delay. It is recommended to assign the Door /
Window Contact to the Delay zone.
Home zone
When the system is armed in Home Mode, the sensors assigned to the Home zone do not trigger an
alarm. It is rec
armed in Home Mode when you are home and move inside your home without triggering any alarm.
SMS
IMPORTANT: BEFORE USING FOR THE
FIRST TIME
SAVE A PHONE NUMBER FOR SMS
NOTIFICATIONS. (Refer to
on the opposite column)
Only stored numbers can control and
INSERT A SIM CARD IN THE CONTROL PANEL
Each SMS opera in this user
manual will be illustrated as follows:
You send:
SMS Command
command sent by the user
.
The control panel replies:
Control panel’s reply
by the control panel
.
The speech bubbles that follow are the
dialogue between the user and the control
panel (SMS sent by the user are in pink, SMS
sent by the control panel are in grey).
The system is in English by default. To
change the system’s language, refer to page
12 of this manual.
Store Phone numbers for SMS
Send:
6
SMS numbers:
1.
2.
3.
4.
5.
Copy, Paste, then Edit
(case
SMS numbers:
1. 067890033
2. 067890022
3. 067890011
4. 067890000
5.
Ok
7
BEFORE STARTING SMS OPERATIONS .
MAKE SURE THE SIM CARD DOES NOT
REQUIRE ANY PIN CODE .