VIEWEG
EN
5 Operation
5.1 Service menu
(Press UP and DOWN during switching on the robot to enter the service menu .)
Use UP and DOWN, ESC and ENTER to navigate through the menu and change settings .
Firmware:
Shows the actual installed firmware version
Ser .Nr .:
Shows the serial-number of the smartBOX
Language:
setting of language for boot welcome
Statmenu:
YES
- after booting process, the smartBOX display switch automatically
after 3 sec . to the STATUS Menu
NO
– after booting process, the smartBOX display stays in smartBOX
screen .
Dispense:
YES
– smartBOX has normal function incl . dispensing
NO
– Although dispensing is active in the robot settings, the ecoPEN
valve does not dispense – needed for TEST RUN for running the
Robot program without dispensing
Save:
save the actual settings and leave the SERVICE Menu
I/O-Monitor: open the test menu for I/O-test with JR/VR3000 robot series
Testmenu
service and test – password detected
31
Operating Instructions smartBOX
