INSTALLATION
CAMERA ANGLE ADJUSTMENT
Contact ViewZ
• Address : 177 W. Orangethorpe Ave., Placentia, CA 92870
• This device may not cause harmful interference
• This device must accept any interference received, including interference
that may cause undesired operation.
• Phone : (714) 996-1177, Fax : (714) 996-1138
• Specification subject to change without notice.
PRECAUTIONS
REGULATORY NOTICE
Do not use the camera if fumes, smoke or a strange odor is emitted from the unit,
or if it seems to not function correctly. Disconnect the power source immediately
and consult your supplier.
1. Attach the camera base on the installation surface with the supplied
screws.
2. Adjust the camera angle by moving the camera body
3. Re-assemble the dome cover.
4. Connect the camera output to the DVR or to the monitor.
5. Connect the power source.
–
Rotate the camera as necessary by
turning the camera gimbal on the base.
–
Rotate the barrel by grasping the holder.
–
Adjust the camera to desired angle. It
may be necessary to loosen the screws
on the sides of the gimbal.
Always follow the instructions in the installation guide when applying
power. Fire and equipment damage can occur if power is applied
incorrectly. For the correct power supply, refer to the specification sheet.
If installed close to a TV, radio transmitter, magnet, electric motor
transformer or audio speakers the magnetic field generated may interfere
with or distort the image.
Do not install or operate in small, unventilated areas. Heat build up can
significantly reduce the performance and operating life of the product and may
cause a fire.
Whether or not the camera is used outdoors, never point it toward the
sun. Use caution when operating the camera in the vicinity of spot lights or
other bright lights and light reflecting objects.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
To prevent damage, do not drop the camera or subject it to strong shock or
vibration.
Do not use the camera in extreme environments where high temperatures or
high humidity exists. Use the camera under conditions where temperatures are
between 14°F ~ 122°F (-10°C ~ 50°C), and humidity is below 90%.
VZ-HDC-2
Mini Indoor Dome Camera
D-WDR
360
6~90
o
178
o
178
o
Anchor
Screw
