1-3. WHITE BAL
(1) MANUAL
- In the manual mode, the user can choose the color and balance.
The user can adjust the color and temperature by controlling red
and blue gain.
(2) AWC→SET
- This is used in order not to change the color and temperature
values set for a certain environment. Press for two to three
seconds the “Set Button” on the OSD MENU in order to have
the color and temperature values fixed.
When the value of OPD Block is included in ATW Area, color and temperature are fixed for
that relevant value only. If there is no such value included, the color and temperature are fixed
for the entire image.
(3) ATW 1
- Auto tracking white balance. In certain light conditions the colors are adjusted automatically.
Use this mode when color temp. is between 1800k~10,500k
(4) ATW 2
- Auto tracking white balance. In certain light conditions the colors are adjusted automatically.
Use this mode when color temp. is between 1800k~10,500k
- 19 -
