threshold point. But the user changed
the volume level, which was more than
the threshold point (min. TA volume
level), it will be set to the last level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
When TA button (22) is pressed long, it
is selected EON TA LOCAL/EON TA
DISTANCE mode.
The purpose of this key is to reduce
unwanted EON TA switching, which
EON TA information was received from
current station and the radio switched to
that EON linked station, but no
information could not be received
because the EON linked station is
located too far from that area. So the
radio is switched back to current station
again. In above operation, a customer
listens to a wrong program or mute
sound for a while.
EON TA LOCAL mode
When the filed strength level of EON
linked is less than threshold level, the
radio does not switch that station, and a
customer can hardly listen to any
disturbances.
When EON TA LOCAL mode is selected,
“EON TA LO” on numeric display is
indicated for a few seconds.
EON TA DISTANCE mode
EON TA switch is tried to implemented
by the information of current station.
When EON TA DISTANCE mode is
selected, “EON TA DX” on numeric
display is indicated for a few seconds.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast
station
name
data
expressed
in
alphanumerically
characters
AF: Alternative Frequencies
Frequency
list
of
broadcasting
stations
transmitting
the
same
program
TP: Traffic Program Identification
Identification
data
for
traffic
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or
not
EON: Enhanced Other Networks
Information
Broadcasting information on PI, AF,
TP, TA, etc, relating to networks
other than the network used for
current reception
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
CD OPERATION
SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert the CD with the printed side
up into the CD compartment until you feel
some resistance. The CD is drawn into the
driver automatically. CD playback begins.
If a CD is already inserted in the driver:
Keep pressing MODE button (4) shortly
until the CD mode display appears.
SELECTING TRACKS
Press
button (6) or
button (5) to
move to the previous track or the following
track. Track number shows on display.
Hold
button (6) or
button (5) to fast
reverse or fast forward. CD play starts from
when you release the knob.
OPERATION
13
