21
EN
KEN002VAC
v1• 11.11.2020
INSTALLATION MANUAL - SELECTING THE INSTALLATION PLACE
INDOOR UNIT
OUTDOOR UNIT
●
Install the indoor unit on a strong wall that is not
subject to vibrations.
●
The in let and outlet ports should not be obstructed:
the air should be able to blow all over the room.
●
Do not install the unit near a source of heat, steam, or
flammable gas.
●
Do not install the unit where it will be exposed to
direct sunlight.
●
Select a site where the condensed water can be
easily drained out, and where it is easily connected to
outdoor unit.
●
Check the machine operation regularly and reserve
the necessary spaces as shown in the picture.
● Select a place where the filter can be easily taken out.
●
Do not install the outdoor unit near sources of heat,
steam or flammable gas.
●
Do not install the unit in too windy or dusty places.
●
Do not install the unit where people often pass. Select
a place where the air discharge and operating sound
will not disturb the neighbours.
●
Avoid installing the unit where it will be exposed to
direct sunlight (other wise use a protection, if neces-
sary, that should not interfere with the air flow).
●
Reserve the spaces as shown in the picture for the air
to circulate freely.
●
Install the outdoor unit in a safe and solid place.
●
If the outdoor unit is subject to vibration, place rubber
gaskets onto the feet of the unit.
150
150
15
0
mounting plate
condensed water drain pipe
insulating covering
electrical cable
water drain pipe
sleeve
minimum space to be reserved
(mm) showing in the picture
300
500
2000
300
50
0
Installation diagramm
The purchaser must ensure that the person and/or company who is to install, maintain or
repair this air conditioner has qualifications and experience in refrigerant products.
indoor unit
indoor unit
outdoor unit
outdoor unit
