13
4.
"Heating time program"
Fig. 7
5. Select any day.
Fig. 8
6. Select the time phase you want to change.
Fig. 9
7. Set the required switching times.
8. Press
"OK"
to confirm
9. Set further switching times or tap
"OK"
to confirm.
Fig. 10
10. Select the days of the week when the new switch-
ing times should apply.
11. Press
"OK"
to confirm
Note
The switching times will be adopted exclusively for
those days which have been checked.
Comfort function "Party mode"
Setting "Party mode"
Note
You can set party mode directly for the regulated cir-
cuit set in the default display.
Default display
1.
"Menu"
2.
"Central Heating"
3. Select the required regulated circuit.
4.
"Op mode"
An operating program with a highlighted frame is
already enabled.
5. If
"Party mode"
is not enabled, tap
"Party mode"
.
Note
Heating mode must be switched on in order to
display
"Party mode"
for selection.
6. Set the required room temperature for
"Party
mode"
.
7. Press
"OK"
to confirm
Central heating
Time program
(cont.)
5778 774 GB
Summary of Contents for Vitotrol 350-C
Page 42: ...42 5778 774 GB...
Page 43: ...43 5778 774 GB...
