Temperature matching
A matching of temperatures may be required to adapt the controller to local con-
ditions, e.g. when installing it on a cold concrete wall.
&
Regulated temperature too high:
Turn the controller towards "
–
" to
adjust the temperature
&
Regulated temperature too low:
Turn the controller towards "+" to
adjust the temperature
Repeat if required after the room tem-
perature has stabilised.
Note
The Vitotrol 100 requires approx.
1 hour after commissioning to assimi-
late to the ambient temperature.
Users should only then make adjust-
ments to suit their personal require-
ments.
DHW heating
The DHW heating function can be modified at the rotary selector at the back of
the Vitotrol.
In the delivered condition, the rotary selector is set to "1".
Adjusting the room thermostat
(cont.)
11
53
55
246
