Viessmann VITOPEND 100 WH0A, Datasheet

Page: 23 / 42

Configuration via:
& Vitosoft 200, type LNR via Optolink
&
Vitodata 300
Data points provided by the heating control unit are hooked up to
Vitocom 300 via LON. Additional settings can be made during
commissioning, if system-specific special functions, such as mon-
itoring limits, are required.
Fault messages are reported to the Vitodata 300 server via the
internet. These messages are then transferred by the
Vitodata 300 server to the following communication services:
& PC with internet access
&
Fax
& Text message to D1/D2/E-Plus/O
2
[or other] mobile phones
&
E-mail
& Voicemail
On-site requirements:
& Analog telephone connection
–
for type FA3 with TAE socket, code "6N"
–
for type FI1 with RJ45 socket (ISDN)
&
LON communication module (accessories)
Standard delivery:
&
LON connecting cable RJ45
—
RJ45 for data exchange
between the Vitotronic and Vitocom 300 (7.0 m long)
&
Power supply unit
* 1
& Power cable from the power supply unit to the basic module
& Basic module
* 1
(with 8 digital inputs, 2 digital outputs and 2
sensor inputs):
–
Type FA1: with integral analog modem and connecting cable
for telephone socket TAE 6N (2.0 m long)
–
Type FE1: with connecting cable with RJ45 plug and sub-D
plug (9 PIN) as a modem connecting cable (GSM modem
accessories) or a suitable external ISDN terminal adaptor
–
Type FI1: with integral ISDN modem and connecting cable
with RJ45 plug for ISDN socket (2.0 m long)
Accessories:
Accessories Part no.
Wall mounting enclosure for the installation of the
Vitocom 300 module, if no control panel or electrical
distribution panel is available
2 rows
7143 434
3 rows 7143 435
Expansion module
* 1
–
10 digital inputs
–
7 analog inputs (2 may be configured as pulsed
inputs)
–
2 digital outputs
–
see the basic module for dimensions
or
7143 431
–
10 digital inputs
–
7 analog inputs (2 may be configured as pulsed
inputs)
–
2 digital outputs
–
1 M BUS interface with connection of up to, for
example, 250 M BUS capable heat meters with M
BUS slave interface to EN 1434-3
–
see the basic module for dimensions
7159 767
Uninterruptible power supply unit
* 1
(UPS) 7143 432
Additional rechargeable battery pack
* 1
for UPS
–
practical for: 1 basic module, 1 expansion module
and allocation of all inputs
–
required for: 1 basic module and 2 expansion
modules
7143 436
Accessories Part no.
Extension of the connecting cable
Installation distance 7 to 14 m
–
1 connecting cable (7.0 m long)
and
1 LON coupling RJ45 7143 495
and
7143 496
Installation distance 14 to 900 m
–
2 LON plug-in connectors RJ45
and
2-core cable, CAT5, screened or JY(St)
Y 2 x 2 x 0.8
or
7199 251
and
on-site
–
2 connecting cables (7.0 m long)
and
2 LON sockets RJ45, CAT6
and
2-core cable, CAT5, screened or JY(St)
Y 2 x 2 x 0.8 7143 495
and
7171 784
and
on-site
Power supply unit (standard delivery, Vitocom 300):
Specification
Rated voltage 85 to 264 V ~
Rated frequency 50/60 Hz
Rated current 0.55 A
Output voltage 24 V
–
Output current 1.5 A
Protection class II
Protection IP 20 to EN 60529;
safeguard through appro-
priate design and installa-
tion
Potential separation
primary/secondary
SELV to EN 60 950
Electrical safety EN 60 335
Permissible ambient temperature
–
for operation with supply voltage
U
E
187 to 264 V
-20 to +55 °C
Installation in living
spaces or boiler rooms
(standard ambient condi-
tions)
–
for operation with supply voltage
U
E
100 to 264 V
-5 to +55 °C
Installation in living
spaces or boiler rooms
(standard ambient condi-
tions)
–
during storage and transport -25 to +85 °C
5822
335-1
G
B
VITOPEND 222
VIESMANN
23
*1
Carrier rail installation TS35 to DIN EN 50 022, 35 x 15 and 35 x 7.5.
Accessories for the Vitotronic 200, type HO1
(cont.)