Vitodens 200-W, B2HB 19 to 35 Technical Data
5461 883 - 02
12
Wall Mounting
Mounting Bracket
1. Remove the external accessories connection box
cover.
2. Loosen the screws at the bottom of the boiler
(do not remove completely).
3. Remove the front encloser panel (lift up and pull
away from the boiler).
4. Mount boiler onto the mounting bracket and connect
boiler to the installation fittings.
5. Ensure the boiler is securely mounted.
CAUTION
Whichever mounting method is used, ensure that the
bracket is tightly and securely fastened to wall. Failure
to secure boiler properly could cause boiler to loosen,
posing a severe safety hazard.
Fitting the wall mounting bracket
See the installation instructions applicable to the
mounting bracket on each type of material.
Models B2HB 19, 26, 35
CAUTION
The boiler must be level both vertically and horizontally
to ensure proper draining of the condensate.
