11
Removing the front panel and mounting the boiler
Note
When mounting on a wall, please note: Weight without
packaging is approx. 65 kg.
2x
3.
1.
2.
Fig. 4
1.
Undo the screws on the underside of the boiler; do
not remove them completely.
2.
Remove front panel.
3.
Hook the boiler into the wall mounting bracket.
4.
Take the additional type plate from the documenta-
tion supplied with the boiler.
In consultation with the system user, attach the
additional type plate to the outside of the appliance
in a position visible to the flue gas inspector.
Fitting the connections on the water side
For installation of fittings on the heating water
side and DHW side, see separate installation
instructions.
!
Please note
To prevent appliance damage,
connect all pipework free of load and torque
stress.
Installation sequence
Mounting the boiler and making connections
5697789
Installation
Summary of Contents for Vitodens 111-W
Page 5: ...5 13 Keyword index 58 Index Index cont 5697789...
Page 59: ...59 5697789...
