66
5784 568 - 18
Vitodens 100-W, B1HA/B1KA 26 to 125 Combi Installation/Service
Boiler Connection
(continued)
Parameter default setting is 20 (or 68 if display is
converted to °F).
Adjusting the heating curve set point
Setting the set point
1. Tap
/
.
The set parameter flashes and
r
will be displayed.
2. Use
/
to select the parameter.
3. OK to confirm.
Note:
When adjusting this setting, bear in mind that
your heating system requires some time to heat
the home to the required temperature.
Legend
A
Boiler water temperature
B
Outdoor temperature
C
Set point
Increasing set point temperature
Reduced set point temperature
Adjustment of the increase set point temperature
from 68 to 79°F (20 to 26°C)
Adjustment of the reduced set point temperature
from 37 to 52°F (3 to 14°C)
Legend
A
Boiler water temperature
B
Outdoor temperature
C
Set point
Troubleshooting
