19
Further information can be found in chapter
"Terminology" in the appendix.
Setting the standard room temperature
Factory setting: 20 °C
For the preferred heating circuit
For all heating circuits
Standard menu
1. / for the required value
2.
OK
Extended menu
1.
2.
"Heating"
3. / for the required heating circuit if necessary
4.
"Set room temperature"
5. Set the required value.
Setting the reduced room temperature
Factory setting: 3 °C
Extended menu
1.
2.
"Heating"
3. / for the required heating circuit if necessary
4.
"Set reduced room temp"
5. Set the required value.
Central heating with this temperature:
■
Between the time phases for standard heating mode
(see page 19)
■
In the holiday program (see page 22)
Heating program
Further information can be found in chapter
"Terminology" in the appendix.
Setting the operating program
For the preferred heating circuit
For all heating circuits
Standard menu
1. / for the operating program:
"Heating and DHW"
2.
OK
Extended menu
1.
2.
"Heating"
3. / for the required heating circuit if necessary
4.
"Heating program"
5. E.g.
"Heating and DHW"
For information on the operating programs, see
page 14.
Time program
Further information can be found in chapter
"Terminology" in the appendix.
Central heating
Room temperature
5814953
Summary of Contents for VITOCROSSAL CI
Page 46: ...46 5814953...
Page 47: ...47 5814953...
