Product Installation
7
Standard Equipment
Steel domestic hot water storage tank with
two-coat enamel finish, mounted
polyurethane foam insulation and
electrostatically powder coated sheet metal
enclosure panel in a vitosilver finish with...
– preinstalled consumable anode
– integrated thermometer and
– adjustable leveling feet.
The following are packed separately and
attached to the crate:
– installation fittings package: with the
necessary brass couplings, adaptors, other
necessary hardware, and hemp
– temperature and pressure relief valve
– sensor well with insulation
– thermometer
– Installation, Operating, Start-up and
Service Instructions
Product Installation
This is a simplified conceptual drawing only!
Piping and necessary componentry must be
field verified. Proper installation and
functionality in the field are the
responsibility of the heating contractor.
Domestic hot water connections
Domestic hot water
DHW recirculation line
DHW recirculation pump
Spring-loaded flow check valve
Discharge pipe
Temperature and pressure relief valve
Shutoff valve
Drain
Domestic cold water supply lines
Backflow preventer
Domestic cold water inlet
Precharged expansion tank
(required where backflow preventer is
installed; check local plumbing codes
and requirements)
5
1
6
7
5
1
3
v
1
.4
IMPORTANT
