13
Fitting the thermal insulation jacket
Note
Ensure that no fleece remnants enter the heating
water buffer cylinder through the cylinder connections.
1.
6x
6x
3.
4. 6x
2. 6x
Fig. 8
Note
2 people are required for the following work.
1.
At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket. Place the thermal insula-
tion jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
2.
At the front of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket.
3.
Push the clip fasteners at the back of the cylinder
as close together as possible.
4.
Push the clip fasteners at the front of the cylinder
as close together as possible.
Installation sequence
Thermal insulation on the Vitocell without…
(cont.)
6154032
Installation
Summary of Contents for Vitocell 100-E SVPA 400 l
Page 31: ...31 6154032 ...
