16
4.
Confirm with
OK
.
5.
Use
+
/
−
to select an hour.
6.
Confirm with
OK
.
DHW heating is switched on during the highlighted
hour.
7.
Select further hours.
8.
To save, press and hold
OK
for 3 seconds.
"SAVE"
appears.
9.
Repeat these steps for the other days.
Note
■
If no button is pressed for 30 seconds, the program
closes without saving.
"EXIT"
appears.
■
If the time and day have not yet been set, the heat
pump control unit will ask you to do this. See
page 18.
DHW demand
The draw-off profile can be changed from L (2 people)
to XL (4 people) to accommodate a higher DHW
demand or provide greater convenience. This change
may only be made by your contractor.
Increased DHW hygiene
This function allows you to improve the microbiological
quality of the water in the DHW cylinder.
To ensure increased DHW hygiene, the drinking water
in your DHW cylinder can be heated to 60 °C at regu-
lar intervals.
Your contractor can set this function at the control unit
and select an interval between 1 and 30 days.
This function switches on regardless of the selected
operating program.
During DHW heating for increased DHW hygiene, the
symbol next to the DHW temperature rotates.
DHW heating
Setting a time program
(cont.)
5593131
Summary of Contents for T0E 060-A
Page 5: ...5 10 Keyword index 25 Index Index cont 5593131 ...
Page 26: ...26 5593131 ...
Page 27: ...27 5593131 ...
