background image

5831392 GB

6/2018

Installation and service

instructions

for contractors

VIESMANN

EM-EA1 extension

Function extension for forwarding fault messages

Safety instructions

Please follow these safety instructions closely to prevent accidents
and material losses.

Safety instructions explained

Danger

This symbol warns against the
risk of injury.

!

Please note

This symbol warns against the
risk of material losses and envi-
ronmental pollution.

Note

Details identified by the word "Note"
contain additional information.

Installation, initial start-up, inspection,
maintenance and repairs must only be
carried out by a competent person
(heating engineer/installation contrac-
tor).

Before working on the equipment/heat-
ing system, isolate the power supply
(e.g. by removing a separate mains
fuse or by means of a mains isolator)
and safeguard against unauthorised
reconnection.

When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.

Repairing components which fulfil a
safety function can compromise the
safe operation of your heating system. 
For replacements, use only original
spare parts supplied or approved by
Viessmann.

Summary of Contents for EM-EA1 extension

















Reviews: