19
!
Please note
Damaged sensor leads (capillary tubes) result in
incorrect sensor functions.
Never route the connecting lead and the capilla-
ries near hot components.
Do not kink the capillary tubes.
4x
4.
5.
3.
2.
1.
Fig. 19
1.
Seal in the sensor well.
2.
Insert the temperature sensor into the sensor well
as far as it will go.
Note
Never
wrap insulating tape around sensors.
3.
Secure the retaining bracket at the selected posi-
tion.
Note
Observe the length of the capillary tube.
4.
Slide casing onto retaining bracket.
5.
Secure the casing by bending up the tabs.
Electrical connections
Earth the appliance with the earth conductor at the
"PE" terminal. This cable must have at least the same
cross-section as the power cable. Never loop earth
cables, i.e. never route them from one appliance to
another.
Install high limit safety cut-out (STB)
5838690
Summary of Contents for CVBA
Page 22: ...22 5838690 ...
Page 23: ...23 5838690 ...