8
5600 336 - 04
CombiPLUS Kit for Vitodens 100-W, WB1B Quick Start
Connecting the CombiPLUS Wiring
Connecting the CombiPLUS
A
wiring using
the supplied control and pump cables.
1
Remove both standard knock-outs from the
rear right side of the CombiPLUS
A
.
Route the control cable
Q
through one
knock-out and the pump cable
R
through
the
other.
Note:
There are optional knock-outs on the
front left side of the CombiPLUS
A
(if required).
Secure the cables inside the CombiPLUS
A
using the locknuts provided.
2
Connect the electrical connectors in the
CombiPLUS
A
as shown.
Installation
1
2
A
Q
R
A
A
Pump connection
Diverting valve
motor connection
Flow sensor connection
Water Temperature
sensor connection
To remove,
push to
unlock
