Make sure to set the actual salt level each time the
brine tank is refilled with salt.
In order to cancel the salt level control feature,
press
▲
or
▼ button until the display screen shows
OFF. Pressing the
“SET” button will confirm the
changes introduced.
The description of the remaining functions
available at the control panel is provided in
section II.
B. Programming the control panel of Aquahome 30-N water softener
Descriptions in English: display screen, current salt level button, brine tank illumination button
“up” button, menu selection button; “down“ button, regeneration button (tonight – press;
immediately (hold for 3 seconds), set/menu button
Upon plugging the transformer
into a power socket the display
screen will show a model code of
a given model of the device (u30)
for a few seconds as well as the
test number (such as J30 or
similar).
Then the display screen will show
the
PRESET
TIME
caption as well
as flashing 12:00.
When the display screen shows --
--, press
▲ or ▼ buttons until
caption
u30
appears on the
display screen.
Then press the “SET” button, the
display screen will show
PRESENT
TIME
caption as well
as flashing 12:00.
Audio signaller
(BIP):
the signaller
will activate each time the button
is pressed. Single audio signal
indicates one change on the
display screen. Series of audio
signals indicates wrong button
being pushed and the need to
push another button.
Setting Time
Figure
4
12
