WEP
WPA 2
Fig. 2: Peer-to-peer connection
Step 1: At your end device, select
Settings > WLAN to indicate the
available WLAN networks.
Step 2: Select a network, e.g. "trio-e-1234567890".
Step 3: Enter the password and connect (see the ten-digit PW
number on the label of the WLAN module)
ð
You have established a direct connection between the end
device and the WLAN module.
Step 4: Open the Internet browser at the end device. Type
1.1.1.1 in
the address line and press Enter to confirm.
ð
The user interface of the Multiplex Trio E is indicated.
Requirements:
n
A direct connection has been established between an end device
and the WLAN module.
n
The home network must have a good signal strength in the area of
the Multiplex Trio E fitting.
Establishing a peer-to-peer connection
Connecting the WLAN module with the home network
Handling
Multiplex Trio E-WLAN module
12 from 15
