3 Handling
3.1
Assembly information
3.1.1
Mounting instructions
Do not remove the model from the packaging until immedi‐
ately before use.
System components may, in some cases, become damaged through
transportation and storage.
n
Check all parts.
n
Replace damaged components.
n
Do not repair damaged components.
n
Contaminated components may not be installed.
Observe the following when mounting:
n
flow direction indicator
n
use suitable tools
Choose the place of installation so that the fitting is easily
accessible and simple to operate.
For information, refer to the instructions for use of the Profipress /
Profipress XL, Sanpress / Sanpress XL and Sanpress Inox /
Sanpress Inox XL systems.
For information, refer to the instructions for use of the Profipress /
Profipress XL, Sanpress / Sanpress XL and Sanpress Inox /
Sanpress Inox XL systems.
3.2
Assembly
3.2.1
Leakage test
The installer must perform a leakage test before commissioning.
Checking system components
During assembly
Laying and fixing pipes
Length expansion
Handling
Easytop XL CRV slanted seat valve (combined free flow valve with backflow preventer) with flange connection
13 from 14
