3 Handling
3.1
Assembly information
3.1.1
Mounting instructions
Do not remove the model from the packaging until immedi‐
ately before use.
System components may, in some cases, become damaged through
transportation and storage.
n
Check all parts.
n
Replace damaged components.
n
Do not repair damaged components.
n
Contaminated components may not be installed.
Observe the following when mounting:
n
Use suitable tools.
n
Installation is not dependent on the direction of flow.
Choose the place of installation so that the fitting is easily
accessible, simple to operate and the insulating shell can be
well mounted.
Information can be found in the instructions for use of the Sanfix /
Sanfix Fosta systems.
Information can be found in the instructions for use of the Sanfix /
Sanfix Fosta systems.
3.1.2
Required tools
The following tools are required for production of a press connection:
Checking system components
During assembly
Laying and fixing pipes
Length expansion
Handling
Easytop ball valve with SC-Contur
14 from 19
