3 Handling
3.1
Assembly information
3.1.1
Mounting conditions
If external sensors are to be connected to the control, their connection
cables or empty pipes must be laid in the cistern before tiling is begun,
Chapter 2.3.5 „System expansions“ on page 10
.
3.1.2
Required material and tools
The following material is required for mounting:
n
if necessary, accessories for the extension of the system
2.3.5 „System expansions“ on page 10
The following tools are required for mounting:
n
cutting knife
3.2
Assembly
3.2.1
Prepare cistern
Requirements:
n
The accessory set electronic (model 8655.11) is mounted.
n
The cistern is fitted into the pre-wall.
n
The pre-wall is tiled.
Remove the shaft cover.
External sensors (optional)
Material
Tool
Handling
WC flush plate for Prevista Visign for More 204 electronic
13 from 25
