Set height of fitting connection panel.
To do this, loosen the lateral screws and choose the desired height.
Re-tighten screws.
Remove the site protection.
Check pipe position and, if necessary, set the required sizes.
Subsequent adjustment is possible.
Replace the site protection.
Attach bracket for threaded bolts:
Insert bracket horizontally and turn clockwise by 90°.
The distance between the brackets may only be a maximum of
390 mm.
Screw in threaded bolt and tighten with a ring spanner (SW 17).
Set the connections for wall plates. The interval between the con-
nections bolts can be set to 226 or 306 mm.
Handling
Washbasin module
12 from 13
Summary of Contents for 8133.3
Page 2: ...Washbasin module 2 from 13...
