n
The roller head has not yet touched the press jaw. The press
machine has not yet built up any pressing force.
n
There is a malfunction. The press machine cannot complete the
pressing.
▶
Release the Start button to interrupt the pressing.
▶
(Smart Cycle) Actuate the Reset button to return the roller head to
its initial position.
▶
(Auto Cycle) Actuate the Reset button and keep it pressed to return
the roller head to its initial position.
3.7
Care and maintenance
The tools are subject to normal wear and tear; for this reason, they must
be maintained in regular intervals. The maintenance and servicing of the
tools must be carried out by service partners authorised by Viega.
3.7.1
Cleaning the press tools
NOTICE!
Damage due to fluids!
Make sure that no fluids get inside the press machine.
Never dip the press machine into fluids.
Requirements:
n
No press jaw is inserted.
▶
Wipe the press machine down with a slightly damp cloth.
▶
Clean the press rolls of the roller head dry and then treat with main‐
tenance oil (art. no. 667 924).
▶
Remove dirt and metallic residues from the press jaw or the press
ring.
▶
Remove residues from the press jaw contour (e.g. using Viega
cleaning fleece, art. no. 104 412).
▶
Apply maintenance oil to the hinges and all moving parts (art.
no. 667 924).
▶
Then thinly spray the press jaw or press ring with maintenance oil
(art. no. 667 924) and let it work for a short time before wiping off
with a lint-free cloth.
Press machine
Press jaws and press rings
Handling
Pressgun Picco 6 Plus
25
