5. Configuring Your System
78
4.
Select Controller 1 from the Role drop-down.
5.
In the additional fields, configure Controller 1 as follows:
Enter a Controller 2 Hostname.
Provide the Hostname exactly as it’s shown in the System Console and do not provide
an FQDN as the Peer Host Name.
For more information, see
Configuring Network Settings at the System Console
.
Enter a Controller 2 IP Address.
Enter a Shared Controller IP Address.
This is the address that will be dialed by incoming calls (including Legacy callers).
Enter a notification email address.
Enter the email address you want to receive notifications in the event of a system
failure.
6.
Click Save and Reboot.
Any modifications you make to your Clusters accrue until you click Save and Reboot,
when all of your Cluster changes are applied to your VidyoGateway server.
When you click Save and Reboot, a dialog box informs you that the change drops all of
the active conference calls on your VidyoGateway server.
