Others
Users Operation:
Open the door: Read the valiad user card, the door will open.
Remove Alarm: Read valid user card, or Input Master code #
Reset to Factory Default:
To reset to factory default, power off, press the Exit Button, hold it and power on, there will be two beeps,
and the LED light turns into yellow, release the Exit Button, then read any two 125KHz EM card, the LED
turn into red, mean reset to factory default successfully. Of the two cards reading, the first one is Master
Add Card, and the second one is Master Delete Card.
Remarks: Reset to factory default, the user’s information is still retained.
Erase all Cards
This will delete ALL User data.
1, Enter Program Mode by press: *(Master Code) #.
2, Press 2 and Master code again
3, Exit: *
All configuration data is retained.
Sound and Light indication
Operation Status
LED
Buzzer
Stand by
Red light bright
-
Enter into programming mode
Red light shines
One beep
In the programming mode
Yellow light bright
One beep
Operation error
-
Three beeps
Exit from the programming mode
Red light bright
One beep
Open lock
Green light bright
One beep
Alarm
Red light Shines quickly
Beeps