Installation
14
Vidikron Vision Model 110 Installation/Operation Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the Vision 110 installation process. The sections following
this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, Refer to
page...
1
Choose a location for the projector
15
2
If installing a Vision 110/CineWide or Vision
110/CineWide with AutoScope:
Install fixed CineWide base
plate or AutoScope lens motor
22
3
Mount the projector
2
8
4
Connect signal sources to the projector
29
5
Connect external controller to RS-232 port (optional)
34
6
Connect 12-volt trigger outputs to AutoScope lens motor
and/or other equipment (optional)
35
7
Connect projector and lens motor (if present) to AC power
and power up
36
8
For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
37
9
Primary lens adjustments: projected image size (zoom),
position (shift) and focus
17, 3
8
10
Install CineWide anamorphic lens (optional)
39
11
CineWide lens adjustments: position, pitch (angle), geometry
and focus
41
12
Projector calibration: adjust the following
for each input
;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
47 through 54
Note
