Vidikron PlasmaView VP-42HD, Owner'S Operating Manual

Page: 61 / 64

Specifications
Vidikron PlasmaView Owner’s Operating Manual 51
PRE
L
IMINAR
Y
VESA
1024x768
60.00 48.40 neg neg
SGI 60.00 49.70 -- --
VESA 70.10 56.50 neg neg
MAC 74.90 60.20 Sync on Green
VESA 75.00 60.00 pos pos
VESA 85.00 68.70 pos pos
IBM 100.00 80.50 neg neg
IBM 1280x768 56.20 45.10 pos pos
SGI 1280x1024 60.00 63.90 -- --
IBM 1280x1024 60.00 64.00 pos pos
HP 1280x1024 72.00 81.10 -- --
IBM 1280x1024 75.00 80.00 pos pos
SUN 1280x1024 76.10 81.10 Composite sync
IBM 1280x1024 85.00 91.10 pos pos
IBM 1280x1024 100.10 108.50 pos pos
IBM 1360x768 60.00 47.70 pos pos
IBM 1400x1050 60.00 65.30 neg pos
IBM 1400x1050 75.00 82.30 neg pos
IBM 1400x1050 85.00 93.90 neg pos
Table 7-2. Computer/Video Signal Compatibility Chart (continued)
Signal Type
Mode
(Dots x Lines)
Vertical
Frequency (Hz)
Horizontal
Frequency (kHz)
Sync Polarity
Horiz. Vert.
Notes:
1. The PlasmaView may not be able to display images from notebook computers in simultaneous (CRT/LCD)
mode. Should this occur, switch the notebook computer to “CRT only” mode. If you are unsure how to do
this, refer to your notebook computer’s user manual.
2. All modes other than the native resolution (1024x768 for the VP-42HD or 1365x768 for the VP-50 and
VP-60) are scaled up or down to that resolution.