manualshive.com logo in svg

Vidicode 1370 LS120, Manual, Page: 80 / 102

Share
Download
Vidicode 1370 LS120 Manual Download Page 80

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV

 

80 

This method of protection is similar to the protection of telebanking via 
Internet and the risk that this form of protection is broken is very low.  

12.2  Changing the card code 

The card code (PIN code of the Crypto Card) is only used when playing 
recordings made with the Crypto Card. Select the option “Changing the Card 
Code” from the settings menu. The recorder will first ask for your present card 
code: 

Card code: XXXX

CONTINUE

STOP

Now the new card code can be input: 

New card code: XXXX
CONTINUE

STOP

The code then has to be entered once more as a check: 

Repeat code: XXXX
CONTINUE

STOP

Then the display will show: 

New card code accepted

STOP

If the wrong code has been entered three times running, the recorder will 
automatically ask for the PUC. That will start a similar procedure with which a 
new card code can be entered.  

The PUC code must be entered correctly. Entering an incorrect PUC code 
five times running will lead to the card being made invalid. 

WARNING 

Summary of Contents for 1370 LS120







































































































Reviews:

No comments