Vidia PBL-001, User Manual

Page: 7 / 16

6 7
CAUTION: The blade is very sharp, please handle carefully.
4. Turn the cup upside down and place it onto the motor unit, aligning the tabs
on the cup with the motor unit . Turn it clockwise until you feel it click into
place.(Fig.2)
NOTE: The appliance will not work if the jar is not assembled onto the
motor unit properly.
5. Press one of the buttons to activate.(Fig.3)
6. To remove the cup, ensure that the motor has stopped running. Then turn
cup counter clockwise (Fig.4) and pull straight up to remove.(Fig.5)
7. Turn the cup upright and remove the blade assembly by twisting the blade
assembly counter clockwise. Be sure to store the blade assembly attached
to an empty cup when not in use.
8. Twist the sip&seal lid onto the cup to enjoy your drink on the go. Press flip
top cap firmly into the opening to get the best seal and prevent leaking. The
flip top cap locks open when pressed backward.
9. Make sure that the motor base is unplugged when not in use.
Assembly instructions