66550062-EN - V6.0 - 31/10/21
- 61 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
Fig. 88
Edit properties for Videx IP Wizard
Fig. 89
Allow the connection
SIP CONFIGURATION IN DETAIL
This section describe in detail, field by field, the SIP parameters.
User ID:
it is the user id for the SIP server (i.e. 2345 commonly the
extension number).
Password:
it is the password for the SIP user id (i.e. known as ac-
count’s secret for Asterisk).
Auth. Name:
it is the authorization user for the SIP server (i.e. for
asterisk it is the same of the User ID)
Server IP:
it is the IP address of the SIP host.
Domain:
it is the SIP domain name which could be a FQDN string (i.e.
mycompany.com) or an IP address (usually the same of Server IP field).
Reg.Expiry Time (m)
: Configures the time period (in minutes) in
which the phone refreshes its registration with the specified serv-
er. The default setting is 1.
Local SIP Port:
Determines the local SIP port used to listen and
transmit. The default setting is 5060.
RTP Audio Port:
Defines the local RTP port used to listen and transmit Audio.
RTP Video Port:
Defines the local RTP port used to listen and transmit Video.
Server SIP Port:
Determines the server side SIP port used to listen and transmit. The default setting is 5060.
DTMF:
Determines the transportation of the DTMF:
•
RFC2833
, which means to specify DTMF with RTP packet. Users could know the packet is DTMF in the RTP header as well as the
type of DTMF.
•
SIP INFO
, which uses SIP INFO to carry DTMF. The defect of this mode is that it’s easily to cause desynchronized of DTMF and
media packet if the SIP and RTP messages are required to be transmitted respectively.
The default setting is “RFC2833”
Open Relay 1
: Determines the numeric button that enables relay 1.
Open Relay 2
: Determines the numeric button that enables relay 2.
Switch Camera:
Determines the numeric button that enables switching between door panel camera and external camera
Video Codec:
Lists the available and enabled Video codecs for this account. Users can enable the specific video codecs by moving
them to the selected box and set them with a priority order from top to bottom. This configuration will be included with the same
preference order in the SIP SDP message.
Video Encoder Resolution:
Configures the H263 encoder resolution which it will be used. Default setting is CIF.
H.263+ Payload Type:
Specifies the H.263+ codec message payload type format. The default setting is 96.
Audio Codec:
this setting cannot be modified.
Fig. 90
SIP Configuration in detail
VX IP Wizard
Wizard configuration software for VIDEX IP System
Summary of Contents for IP videokit IPVK/6296 Series
Page 72: ...66550062 EN V6 0 31 10 21 72...
Page 73: ...66550062 EN V6 0 31 10 21 73...
Page 74: ...66550062 EN V6 0 31 10 21 74...
