ENUK - V1.4 - 25/01/17
42
4000 Series GSM Audio Intercom - Technical Manual
4000 Series GSM Audio Intercom with Proximity
Programming the GSM Intercom
STORE/QUERY A PROXIMITY FOB/CARD (FOB, 000 - 999)
Once the built-in proximity reader has been enabled and the number of bytes to check for has been set (refer to the
EPR
and
PBY
setup on the previous page) the proximity fobs/cards can be programmed into the GSM PRO intercom.
The GSM PRO intercom can store up to 1000 fobs/card (000 - 999). The reader can be programmed with any one of the following
fobs:
• 955/T or 955/C =
Videx fobs or cards. These fobs and cards have no site code and have a 5 digit user code, so
the
PBY
function must be set to 02 (the default setting, checking for 2 bytes).
• PBX1E or PBX2 =
Portal Plus fobs or cards. These fobs and cards have a 3 digit site code and 5 digit user code,
so the
PBY
function can be set to 02 or 03.
The following texts can be used to program fobs or cards.
1111FOBnnn”site”,”user”
Store fob/card in location nnn, where nnn = the memory location from 000 - 999 of where
the fob/card is actually stored (see examples below for each type of fob/card). The “site”
and “user” code is the number taken directly from the fob/card.
1111FOBnnn?
Query the fob/card stored in memory location nnn and send a confirmation text back to
the sender with the stored fob/card details.
The following examples show how to program each fob/card type:
Example 1:
Programming a
955/T
or
955/C
with no site code, a 5 digit user code of
12345
and storing it in memory location
001
, the
following text can be sent to the GSM PRO intercom:
1111FOB001”0”,”12345”
(for these fob/card types a ‘0’ must be inserted for the “site” code).
Example 2:
Programming a
PBX1E
or
PBX2
with a 3 digit site code of 123, a 5 digit user code of
45678
and storing it in memory
location
010
, the following text can be sent to the GSM PRO intercom:
1111FOB010”123”,”45678”
DISABLE OR ENABLE SPEECH BOARD (SBM)
The GSM PRO intercom includes call progress speech annunciation which can be disabled (01) or enabled (02). The default setting
for this function is enabled. The following text messages can be used to enable or disable this feature.
1111SBMnn
Disable or enable speech board nn: 01 or 02 (01 = disabled, 02 = enabled).
1111SBMnn?
Disable or enable speech board nn: 01 or 02 (01 = disabled, 02 = enabled), also send a
confirmation text back to the sender.
1111SBM?
Query the speech board status.
SET SPEECH BOARD VOLUME (SBV)
The volume setting of the speech board in the GSM PRO intercom can be adjusted. The default volume level is set to 75, but can be
set anywhere between 00 (low) up to 99 (high). The following text messages can be used to increase or decrease the volume level
and query the current speech board volume setting stored.
1111SBVnn
Increase or decrease speech board volume nn, where nn = 00 (low) - 99 (high).
1111SBVnn?
Increase or decrease speech board volume nn, where nn = 00 (low) - 99 (high), also send
a confirmation text back to the sender.
1111SBV?
Query the speech board volume setting.
FIND A TELEPHONE NUMBER (FDT)
The find a telephone number feature allows the user to find the dial to open location (between 000 - 999) of where a particular
telephone number is stored in the GSM PRO intercom. It can locate the number either from using the full telephone number or a
minimum of the last 4 digits of a number (see following examples). The following text messages can be used.
1111FDT”yyyyyyyyyyy”?
Find dial to open location of telephone number yyyyyyyyyyy stored, where yyyyyyyyyyy
= telephone number (minimum of 4 digits).
