Videx ESVK Series, Installation Handbook

Page: 17 / 40

66550029-EN - V4.0 - 15/02/19
- 17 -
ESVK/6788 Series “2 wire Bus” videokit
ESVK/6788 Series - Installation handbook
Art. 4800M
Digital codelock module
ADHESIVE GASKET PLACEMENT
Apply the
Y
seal as shown in
Fig. 2
.
ANTI-TAMPERING LOCKS FIXING
Fit the anti-tampering locks
W
as shown in Fig. 3 .
Y
G
Fig. 2
W
Fig. 3
CONNECTION TERMINALS SIGNALS
SW2 Relay 2 command signal (active low)
SW1
Relay 1 command signal (active low)
NC3
Relay 3 normally closed contact
Max
24Vac/dc
3A
NO3 Relay 3 normally open contact
C3 Relay 3 common contact
NC2
Relay 2 normally closed contact
NO2
Relay 2 normally open contact
C2
Relay 2 common contact
NC1 Relay 1 normally closed contact
NO1
Relay 1 normally open contact
C1
Relay 1 common contact
–
12/24Vac/dc power input
+
CLEANING OF THE PLATE
Use a clean and soft cloth. Use moderate warm water or non-ag-
gressive cleansers.
Do not use:
• abrasive liquids;
• chlorine-based liquids;
• metal cleaning products.
TECHNICAL SPECIFICATION
Power Supply: 12/24 Vac/dc – 2VA
Power Consumption: Stand-by: 20mA
Operating: 70mA
Working Temperature: -10 +50° C