Videx 2301N Kristallo Series, User Manual

Page: 24 / 60

VX2300 2 Wire Video Digital System
PrtCode:VX2300_2_9.doc – Pag.24 08/03/2011 Rev.2.9
VIDEOMONITOR WALL MOUNTING INSTRUCTIONS
Fig.1
135cm
Fig.2
C
B
A
B
H
J
C
Fig.3
A
D
E
F
Fig.4
G
A
D

To install Art.SL5478 it is necessary to open it. Follow picture n.4: turn screw “G”, pull cover “D” and lift it up (or push it forward if the videomonitor
is in horizontal position), then disconnect plug “E” (Fig.3) from plug “F” on the connection board housed on the bottom “A”.

Put the bottom “A” against the wall at 135cm from the finished floor (Fig.1). All cables must be fed through hole “H” (Fig.2).

Leaving approximately 135cm from the finished floor, fit the bottom “A” against the wall and mark the fixing holes considering that the cables must
fed through the opening “H” (Fig.2)

Make the holes, and fix bottom “A” on the wall using the two wall plugs “B” and the two screws “C” as shown in figure 2.

Make all connections as per provided diagram.

As shown in figure 3, move cover “D” close to bottom “A”, connect plug “E” to plug “F” on the connection board then proceed with the next step.

Hook cover “D” to bottom “A” by using the two clips “J” (Fig.2) as shown in figure 4 then push down cover “D” towards bottom “A”. Then proceed
with system testing.

When finished the testing, fix cover “D” at the bottom “A” using the screw “G” (Fig.4).
SPECIFICATION
Housing/Mounting 5000 Series Videophones / mounting plate plus connection board
Push buttons Yes, 6
Programming Yes, carried out by the dip-switches located on the rear of the videophone
Controls Loudspeake and call tone volume, brightness and hue
Power Supply Supplied by the BUS line
Working Temperature -10 +50 ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers
VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all
member states of the EU with no restrictions.
This product follows the provisions of the European Directives
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) and 93/68/EEC (CE marking). Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribui-
to liberamente all’interno dei paesi membri dell’unione europea EU.
Questo prodotto è conforme alle direttive Europee
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) e 93/68/EEC (Marcatura CE).